Solar Inverter Technology Transfer

What is Solar Inverter Technology Transfer?

All Solar inverters will run normally with a basic known technology. Usually we can get this solar inverter technology from any electronics expert.  All Electronics experts build the Solar inverter technology as per your specifications and transfer the complete information to you like circuit diagrams, PCB file, Wiring layout, etc. This entire process will be called as Solar Inverter Technology Transfer.

Now with this technology information, you can start your own Solar inverter production plant with reasonable expenditure. All you have to do is purchasing good technology from the right person.

Solar Inverter Technology Transfer Process

What are Lacking in Current Solar Inverters?

Current Solar inverters will just work as normal inverters. Only the difference between solar inverter and normal inverters is “Normal inverters run with power backup and Solar inverters run with Solar power”.

Few solar inverters with better technology will charge the battery with power as well as solar panels. However, there are more possibilities where battery can be over charged in such cases. Also these inverters are not smart enough to understand that the battery is full and it should stop charging the battery. These kind of inverters will only work when there is no power. Because of this, you cannot utilize the solar power properly to cut down your power bills.

If you are interested to purchase this new solar inverter technology, send a mail to saisuryapowersystems@gmail.com

We have a sophisticated technology which will solve all your problems and save your power bills by 75% every month. Let us explain how our technology works. It will automatically understand when the battery is full and then it will stop taking the power from your meter and it will start supplying the power to your home appliances from the Solar inverter battery till the battery power comes to 50%. So with this powerful technology, all your appliances will run with solar power when the power is available too. This will reduce 75% of your monthly power bills and you can save a lot of money.

Also Solar inverters will not work as UPS. This is also one of the lacking factor in the current scenario. Our latest solar inverter technology will work as UPS as well as inverter. With this latest technology, you will not see any power drop in your home or office appliances.

Do you think our technology is Good News to Solar Inverter Production Plants?

As you all know, Customers will look for more sophisticated products which will make your life better with maximum benefits and minimum budget.

Advantages of Our Solar Inverter Technology:

1. When Sun light is available, then it will stop charging from the Mains.
2. When Sun light is not available, then it will start charging from the Mains.
3. High Voltage and Low Voltage fluctuations will be handled by our software.
4. Well written code on microcontroller will adjust the software values and load the program effectively.
5. Testing is required a light case 10w Solar panel, a cro (optional) and a multi meter.
6. Very clear LED Indication and LCD Display to understand better about the charging status and appliances power consumption.
7. Very little equipment is enough for production and testing.
8. Same technology transfer can be used to produce Solar charge controllers.
9. Production requires only the following equipment:
   • Soldering Rod
   • Glue Gun (cost Rs.300/- )
   • Microcontroller Programmer(Cost Rs.1500/-)
10. Isolated Sensing of Mains: This will ensure that even if Phase-Neutral connection is reversed at input side there will not be any electric shock on the battery or PCB.
11. Cycle-Cycle Current Limiting: This is an enhanced protection method for the short circuits/ heavy load condition.
12. LED/LCD display: Only one 6 pin RMC connector for using LCD/LED.
13. Low Cost Driver: Low cost 6N137 driver is used.
14. Priority to Solar Charging Facility: When solar charger is connected, mains charger will go to stand-by and Priority will be for solar charging. If once the battery gets full charge of set voltage, it changes over to UPS/INVERTER mode.
15. Four Stage Chargers:
    • Stage 1: This is constant current charger
    • Stage2: In this stage, voltage of the battery is kept at the full charge level.
    • Stage 3: It is nothing but charger off mode.
    • Stage 4: This stage is float charging stage
16. Zero Drop Solar Charger: Low cost zero drop solar chargers are in various range 12V to120V and 5A to 60A which is compatible with DSP inverter design and can be used with other inverter design as well.
17. Automotive / Tubular Battery selection Switch
18. Inverter /UPS Selection Switch
19. Automatic Solar Detecting
20. Single Side PCB
21. Easy to Assembling and Servicing
22. DSPIC30F2010  Chip
23. Temperature Controlled Cooling Fan

Specifications of Our Solar Inverter Technology:

1. Output Waveform: Pure sine wave
2. 12v/24v/48v DC input
3. 220v-240v AC output
4. Output frequency: 50Hz
5. Rated Power: upto5KW
6. Work Efficiency: 85%-95%
7. User friendly operation
8. LCD/LED indication
9. Full power and soft start
10. High transform efficiency, fast start
11. Strong adaptability and stability
12. Safe and reliable with built-in fuse
13. Temperature controlled fan, safe & efficient
14. Low voltage protection
15. Over voltage protection
16. Over load protection
17. Short circuit protection
18. Input reverse connection protection
19. Over temperature protection 

Our Solar Inverter Technology Transfer Includes -

• Circuit Diagrams
• PCB File of Inverter and Zero Drop Solar Charge Controller
• Wiring Layout and Connection Diagrams
• Transformer Data
• Inverter and Solar Charger Programming
• Assembly File
• Hex File Inverter and Solar Charge Controller
• Components List
• Manual

Now you can be a Technology Independent manufacturer with our Solar Inverter Technology Transfer.

This inverter is best suited for manufacturing of domestic applications as it is simple and easy. It consists of only few components which are easily available, have only 3 SMD components which are single sided PCB. There are no twists which may lead to errors such as DC-CT or EE-16 transformers. This board will be completed by mounting of heatsink along with MOSFET and soldering of few components. It contains LCD which displays all the parameters of the system and gives an indication about any error during the functioning of inverter. A 16 character single line or double line scrolling type LCD will show the status of the inverter. It is very simple to set the values in menu driven set-up mode and is very easy to handle also.

Setup Cost and Equipments:

You need not invest more on the equipments, the basic test jigs, soldering irons, digital multi-meters, RPS, Glue guns and etc. which are less than Rs. 50,000/-

How to Build a Solar Inverter Production Plant at Low Cost with Our Technology?

For Production of 500 Solar Inverters the cost estimation is as follows:

1. Inverter Card – Rs. 850
2. Solar Zero Drop Card – Rs. 400
3. Copper Transformer – Rs. 1250
4. Cabinet & Others – Rs. 600

Total Cost – Rs. 3100/-.

Note:

• Above estimation is for 12V / 850VA with 30 Amps solar Charge Controller.
• Production Cost may reduce up 500/- If you go for Aluminium Transformer.

Important Precautions to be Taken to Maintain this Solar Inverter:

• Mains switch should be kept in ON position
• Mains input should always be connected, to keep the battery in charging condition.
• Water or any other liquids should never enter into UPS
• This system installation place should be well ventilated and it should be easily accessible for servicing.